TUBE MILL 0.500" to 2.000"
DESCRIPCIÓN Y ESPECIFICACIONES
Tube Mill – 0.500” to 2.000” – Gauge 13 to Gauge 22 – ABBEY – ETNA
ESPECIFICACIONES:
EQUIPMENT
: STEEL TUBES MANUFACTURER MILLBRAND : ABBEY – ETNA
MODEL : 2XU
MANUFACTURING
YEAR :
80´sDIAMETERS
RANK TO MANUFACTURE : from 0.500” to 2.000”TUBE
MAXIMUM TICKNESS WALL : from
Gauge 13 to Gauge 22TUBE
MAXIMUM SPEED TO SMALLEST DIAMETER : 100
meters / minute +TUBE
MAXIMUM SPEED TO BEGGEST DIAMETER : 80
meters / minute +HIGH
FRECUENCY WELDER : Brand Thermatool ,
150 Kw , Solid StateUSE MILL: Several
+ : Indicated speed to tubes smallest and biggest is conditioned by galvanized system . If galvanized system is USED , Mill speed could be DECREASED.
MILL DESCRIPTION :
1 ) DOUBLE UNCOILER TO ROLL SHEET STEEL TO TAPES FROM 5 ½” ( Wide ) / 12” -22”
( Internal diameter coil rank ) / 64” ( External Diameter coil ) / Coil maximum weight 2.200 Tons. Per side.
2 ) END WELDER BRAND KENT
3 ) VERTICAL ACCUMULATOR
4 ) TUBE FORMING SECTION with 5 vertical station & 4 horizontal station. Welder thermatool brand solid sate 150 kw with fume extractor
5 ) TUBE GALVANIZED AND COOLER SECTION
6 ) TUBE DIAMETER SIZING with 6 vertical station and 1 turkish head
7 ) TUBE CUTTING SECTION ( FLYING CUTTER ) with fume extractor brand xxxxx
8 ) EXIT TABLE / Length 6 meter
NO TOOLING INCLUDED
Location: MEXICO
Somos especialistas:
¡Facilitamos tu proceso de selección de Removedor de rebaba! Contáctanos y unos de nuestros asesores se pondrá en contacto para saber más de Removedor de rebaba.
Disponemos de una amplia gama de servicios proporcionados por especialistas que te ayudarán a cumplir con cualquier necesidad relacionada con tu proceso. Mas información